The GMH Tower MS is a very robust welded structure, adjusted inside for vertical storage of individual handling units. Containers (handling units) are welded structures, dimensioned according to the most common shipping formats and weights of metal sheets.
The extractor, which is a part of the lift, either transfers loading units from/to storage locations in the tower, or takes the loading unit from/to the operator area. The operator area has been designed to ensure lifting of the material above the container, which allows handling of an entire bundle of sheets using forklift.
Handling of individual sheets is usually carried out by vacuum or magnet lift. The Double and Multi tower system can be equipped with more operator areas, either at front, at back and/or at side machine position (depending on Tower design).
Type of containers
 |
Standard container with optional number of beams
|
 |
Special container
|
General information on GMH Tower MS
Mono Tower
Container payload [t]: 1,5 / 3 / 5
Material dimension [mm]: 1250x2500, 1500x3000, 2000x3000, 2000x4000, 2000x6000
Max. machine height [m]: 7,5
Operator area type: Front
Material lifting: YES
Module Control SW: Optional
Loading cells: Optional
Double Tower
Container payload [t]: 1,5 / 3 / 5
Material dimension [mm]: 1250x2500, 1500x3000, 2000x3000, 2000x4000, 2000x6000
Max. machine height [m]: 12
Operator area type: Front with trolley. Optional: back/side
Material lifting: Optional
Module Control SW: Recommended
Loading cells: Optional
Multi Tower
Container payload [t]: 1,5 / 3 / 5
Material dimension [mm]: 1250x2500, 1500x3000, 2000x3000, 2000x4000, 2000x6000
Max. machine height [m]: 12
Operator area type: Front with trolley. Optional: back/side
Material lifting: Optional
Module Control SW: Necessary
Loading cells: Optional